• Published On: September 12, 2012

    Just a few little bits found in some of the back seat pictures.

    The center rear seatbelt now slides into its own space, I wonder if this has anything to do with the motorized folding rear seats now?

    l405-rearcentersb

     

    A vent has appeared at the seat level, I’m assuming this may have to with the the 4-zone system, but can’t confirm that yet.

    l405-rearseatvent

    And finally, another view, this time of the rear seat with the Executive Class Seating option, not only do we see that the rear seat controls have moved off the door and on to the side of the seat.  But higher up in the picture, an air vent has appeared on the roof.  Looks like it’s replaced the standard roof mounted handle, that still persists for the front passengers.  I wonder if there’s one mounted somewhere else that we can’t see.  It’s probably for the 4-zone system.

    l405-rearexec1

    Another rood air vent shot:

    l405-roofvent3

    Here’s a shot with rear grab handles and no vents:

    l405-rearhandles

     

    And finally a shot of the simple rear seat recline controls:

    l405-simplerearseat

    And finally, the button that moves the front passenger seat forward for more leg room, has been moved to the side of the front passenger seat:

    l405-frseatfwd

  • Published On: September 11, 2012

    From all we’re reading the new Range Rover doesn’t let us down in off-road capabilities, one of the surprises was the increase in wading depth over its predecessor, up 200mm to 900mm or almost 35 inches.

    Back in the 2013 Range Rover media dark ages, I posted these pictures showing some interesting vents along the edges of the hood.  I had thought they may have had something to do with a functional yet decorative hood vent.

    m1fyfbbbjxpnl405-r-ventl405-l-vent

    l405-vent2

     

    They are functional and were known as the “Queen Mary funnels”

    As we learned from the PistonHeads.com:

    Ingesting intake air via the gap between bonnet and wing permits this, circulating it within the clamshell bonnet before entering intake funnels dubbed ‘Queen Marys’ after their resemblance to ship funnels. The earlier QE2 nickname was dismissed when it was discovered only one of the ship’s funnels functioned, trivia fans!

    And a few more shots from the cut away:

    l405-int-vent2l405-int-vent

  • Published On: September 10, 2012

    l405-dragCd

    It was this image that lead to this post, can you guess which item caught my interest?

    Computer Controlled Active Vanes, described as such:

    Active vanes in the main grille optimize aerodynamics by blanking off the grille when cooling airflow isn’t needed.

    We’ve actually heard about this before on the Land_E back in 2010:

    The ITP Intelligent Thermal Program controls engine parameters including exhaust heat management and cooling system function. Through heat exchangers, the EHRS (Exhaust Heat Recovery System) utilizes what is normally wasted heat from the exhaust system to promote faster engine and gearbox warm-up from cold, with several advantages. In a production application, ITP could also control Active Aero Vanes, which would allow specific sections of the radiator aperture to be closed under certain operating conditions. That would reduce high-drag airflow through the radiator core and engine bay when cooling air is not needed – for instance at low ambient temperatures and when running in low-load conditions. The vanes would also be closed during engine warm-up, again to ensure that the engine reaches optimum operating temperature as quickly as possible. Faster engine and catalyst warm-up significantly reduces emissions in the first minutes after a cold start, and by bringing engine and gearbox oils up to operating temperature more quickly, it reduces mechanical frictional losses.

    And a note from the 2013 Range Rover Owner’s Handbook:

    To improve aerodynamics, the vehicle is fitted with active vanes that open only when the
    engine temperature rises or when the air conditioning is turned on. The active vanes
    must be opened manually to allow access to clean any debris from the radiator and the air
    conditioning condenser after off-road driving.

    1. Start the engine and allow it to run for a few seconds..
    2. Switch off the engine.
    3. Switch on the ignition.
    4. Select Sand mode on the terrain response system.
    5. Switch off the ignition.
    6. Using a hose pipe, direct clean water through the front bumper (where shown)
    to remove mud from the radiator and air conditioning condenser.

  • Published On: September 10, 2012

    A new Range Rover always brings new and interesting accessories, here are a couple.

    iPad Holders

    l405-ipadholders

    Noble Plated Mirror Caps, along with another angle

    l405-nobleplatedcaps

    l405-nobleplatedcaps2

     

    New style of Rubber Footwell Mats

    l405-rubbermats

     

    Electrically Deployable Tow Bar

    l405-towbar

  • Published On: September 9, 2012

    Some great new technologies have been added to the new 2013 Range Rover.  Here are some videos showing what this thing can do!