Blast from the Past for Jaguar Land Rover, literally #landrover #jaguar

So this is just a sort of Jaguar & Land Rover cross-over post with a little history.  Both Jaguar & Land Rover have been connected on and off for many years and now it appears to be permanent, especially with all the part sharing that they’re just starting to really take advantage of.

At the Paris motor show, where the Range Rover Evoque was revealed, Jaguar had a concept to show, the CX-75, an electric vehicle, that uses gas turbines as a range extender:

dp_jaguarcx75_parisreveal_002_6280[1]

The 330km/h (205mph) four-wheel drive supercar is capable of running in purely electric (zero tailpipe emissions) mode for 110km (68 miles) on a six-hour domestic plug-in charge. The innovative, lightweight micro gas-turbines are also capable of very quickly and efficiently recharging the Lithium-ion batteries, giving the car a theoretical range of 900km (560 miles).
This remarkable range-extension system is a result of Jaguar’s research engineers adopting a clean-sheet approach to the question of powering the supercars of the future. The C-X75 turns to the very latest evolution of a pioneering British technology: the gas turbine.
Developed in partnership with Bladon Jets, the miniaturized turbine blade – the first viable axial-flow micro-turbine – increases the compression and efficiency of micro gas-turbines to the point at which they can be viewed as a realistic power source. Each of the micro gas-turbines weighs just 35kg and produces 70kW of power at a constant 80,000rpm.

So where am I going with this?  As soon as I read about the gas turbine, I remembered the Rover JET 1, a vehicle touted as the world’s first gas turbine powered car.  Those early Rover gas turbine vehicles were created under the management & design of the Wilks brothers, Spencer & Maurice – they in turn hired their nephew Charles Spencer “Spen” King away from Rolls Royce to be an engineer on the then top secret project.  Spen King actually set the first speed record for a gas turbine car at ~152MPH in 1952.

  jet1a[1]

For anyone who didn’t know, it was Maurice Wilks who actually thought up the Land Rover as a British replacement for his Willys Jeep after WWII.  And Spen King is known as the father of the Range Rover.

This gas turbine connection from the 1940’s to todays Jaguar Land Rover was an interesting connection to the past, and I hadn’t seen it mentioned anywhere else.

For those interested, here are some links to more info:

http://www.rover.org.nz/pages/jet/jet5.htm

http://home.ican.net/~magnet/p4/variants.htm

http://en.wikipedia.org/wiki/Gas_turbine#Concept_Cars

2010-10-18T09:11:00-04:00October 18, 2010|

New little Range Rover optioned with 2WD

I know there’s a business case for it, but to name something a Range Rover and give it a two-wheel drive system, just doesn’t seem right.  I’m sure adding a model to the full Land Rover line-up that could lower their average emissions is something they really need. 

You can read more about it here:

http://carscoop.blogspot.com/2010/05/land-rover-confirms-2wd-version-of.html?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+Carscoop+%28CARSCOOP%29

 

In the same vein, here are the latest spy shots of that new upcoming vehicle.  I am surprised how close they are keeping it to the concept.  While there’s definitely more to it, it looks like they just gave the concept real door handles & side view mirrors.  The Range Stormer had been shown after the Range Rover Sport was basically done, and maybe they’re doing the same thing here.  I’m more interested to see where the interior comes in – as I said before, I’m hoping for some cues as to what we’re going to see in the next Range Rover. 

LRX Spy Shots (1)

LRX Spy Shots (2) 

LRX Spy Shots (3)

LRX Spy Shots (4)

LRX Spy Shots (5)

2010-05-26T18:19:45-04:00May 26, 2010|

Land Rover Designer Resumés have some interesting items

I was searching on some of the Land Rover Project Code Names and I found a few interesting pages.  It seems the UK based designers are posting their current projects in their online resumés.

Here’s Rob M’s page: http://uk.linkedin.com/pub/rob-mcnally/18/335/79a

Listing the following projects:

Design Engineer – Trim
Interior Automotive
(Public Company; Automotive industry)

October 2007 — Present (2 years 7 months)

Land Rover L538 Door Casings
BMW Mini MU Rear Bumpers
Jaguar X351 Door Casings

Studio Engineer for Siemens VDO
Jaguar Land Rover
(Automotive industry)

July 2007 — September 2007 (3 months)

Land Rover L322 10MY IP

Design Engineer – Trim
Intier Automotive
(Automotive industry)

May 2002 — May 2007 (5 years 1 month)

Land Rover L319 & L359 Door Casings & Tailgate trim

The one that really caught my eye is the L538 Door Casings, L538 is the forthcoming Range Rover LRX.  The Freel2.com board did a search on the LRX mule’s number plate and it came back with:

http://www.freel2.com/forum/topic4309.html

LAND ROVER L538 LAND ROVER
Vehicle type: OTHER
Year of Manufacture 2009
Cylinder Capacity (cc) 2000CC
CO2 Emissions 0g/Km
Fuel Type Petrol
Vehicle Colour BLACK
Vehicle Type Approval null

The next page is actually from a site where people can freelance their skills:

http://www.people4business.com/seller-269321.htm

This person has done a lot of work for Aston Martin & Bentley – they list the specific items.  The latest project is listed below:

WARWICKSHIRE (Oct 2007 & ongoing)

CAD ENGINEER – EXTERIOR TRIM – CATIA V5
LANDROVER L538 / L486
Initial design and feasibility studies for the following components: door claddings, rear spoiler, rear finisher, front and rear bumper cover, fender vents. Parametric modeling in Catia V5 to create fully modifiable master CAD models. Use of TCE to save and access data and create product structures. Liaison with styling, CAE and suppliers to mature designs.

So there again, we see the L538, but now we get the L486 listed too.  The L486 is still a bit of a mystery – we hear it’s a 7-seater, but beyond that I’m not sure – could be a larger Freelander or a larger Range Rover LRX, not sure where it’s going to fit in – unless they drop the LR4?

2010-04-24T20:41:48-04:00April 24, 2010|

Land Rover LRX Concept Gallery & Press Release

Land Rover LRX Concept Front Land  Rover LRX Concept Top View Land Rover LRX Concept Interior
  Click for Gallery  

LAND ROVER PRESS RELEASE:

Land Rover unveils a vision of its future at the NAIAS (Detroit Show) in January 2008, with the world debut of the LRX concept – a bold evolution of Land Rover design that signals the brand’s shift into new areas of the market, while remaining true to its core values. As the company prepares to celebrate its 60th anniversary during 2008, the three-door LRX, with its more compact size, lighter weight and sustainability-focused technologies, clearly addresses the needs of a changing world.

“The LRX concept delivers the powerful message that we are as serious about sustainability as we are confident about the continuing relevance and desirability of our vehicles,” says Phil Popham, Land Rover’s managing director. “LRX is in every respect a Land Rover, but it’s a very different Land Rover.

“LRX has unmistakable Land Rover design and the breadth of capability that you’d expect from our vehicles. But it carries those essentials into a segment where the brand has never been before, and with a proposed level of efficiency that would make it one of the cleanest vehicles in its class. It is Land Rover’s way of affirming the brand’s responsible approach to future product development. At this stage, LRX is purely a concept, designed to help us develop our thinking as well as gauge customer reaction – but this feels like a hugely exciting direction to take.”

Compact and premium

LRX is described as a cross-coupe and dramatically extends the scope of what Land Rover represents. Though smaller than the Freelander 2 / LR2, LRX was conceived as a premium car, designed to appeal to new customers in the luxury and executive sector – those who want many of the benefits of a 4×4 and the presence of a larger vehicle, but in a more compact package.

The first all-new Land Rover revealed since Gerry McGovern became the company’s design director, LRX is a natural extension of the Land Rover range, complementing the existing models and helping to define a new segment. Its many recognizable Land Rover design cues include bold new interpretations of the signature clamshell bonnet, the floating roof and the solid ‘wheel-at-each-corner’ stance.

“LRX is a design born out of passion for the brand, but it is different, relevant, engaging and exciting – because Land Rover has never built ordinary cars,” says Gerry McGovern. “LRX has a highly desirable identity and the design alludes strongly to its capability, while clearly underlining our forward-looking philosophy – it’s a Land Rover that would be comfortable on Bond Street or Fifth Avenue, but wouldn’t flinch at getting its wheels dirty.”

Its compact size is one of its greatest assets, which will appeal to anyone who wants the versatile ability of an agile 4×4 with the cachet of the Land Rover name. In addition, its lower weight and the reduced aerodynamic drag resulting from the smaller frontal area give significant gains in fuel efficiency and reduced CO2 emissions.

The LRX concept also adopts intelligent power management systems and other technologies first shown by Land Rover in the Land_e concept in 2006. Further details of LRX’s powertrain and sustainability technologies will be released at the Detroit Show.

Extending ‘breadth of capability’

The positioning of LRX could be described as moving subtly from traditional SUV to crossover, with its more car-like appearance and dynamics that are sportier and on-road biased. But while its character is underlined by excellent agility, handling and performance, LRX also promises the widest breadth of capability in the class. To help achieve this, it has full-time four-wheel drive and Hill Descent Control, as well as a special version of Land Rover’s acclaimed Terrain Response system, to optimize traction on difficult surfaces ranging from icy roads to wet grass, gravel and snow. But to reflect LRX’s on-road bias, Terrain Response also gains a new ‘Eco’ mode for lower emissions during urban driving.

The design of LRX was developed entirely in-house, driven by a passion to create a car that truly represents Land Rover’s future thinking. It has a very dynamic profile, with a distinctive taper to the floating roofline and a muscular shoulder running the length of the car, accentuated by the rising beltline. The glazing wraps right around LRX, with no exposed pillars, creating a bold design graphic. The architectural structure of the upper body can be glimpsed through the windows and roof – echoing some of the best contemporary buildings.

Pushing the wheels out to the four corners helps give the car its purposeful stance, and its front-end design makes a powerful and instantly recognizable statement of Land Rover’s identity. There are new interpretations of Land Rover’s traditional clamshell bonnet, distinctive headlamps, jewel-like, tapering blade indicator clusters front and rear, and subtle side vents. LRX’s wheelarches are wide but softly integrated, housing 20-inch alloy wheels.

The carefully sculpted corners dramatically reduce the car’s visual overhangs front and rear. With its perforated two-bar grille, door releases concealed in the car’s shoulders and graphic details ‘punched out’ of the smooth body surfaces rather than overlaid on them, LRX is beautifully proportioned and elegantly simple – but very dramatic and distinctive.

Impeccable, premium interior

The interior of the LRX concept clearly demonstrates how a compact Land Rover can still be roomy, practical, versatile – and sophisticated. The impeccably executed cabin features a combination of soft leathers in rich tan and dark chocolate, with polished aluminum details.

The ‘fast’ sloping architecture of the center console reflects LRX’s sporty dynamics, as does the distinctive binnacle over the instrument cluster. The electronic display uses ‘floating’ LCD graphics to create a three-dimensional look that can be personalized for different drivers, as well as interacting with LRX’s touch-screen display.

The instrument graphics present data in layers depending on their level of importance, to give maximum relevant information with minimum distraction. When appropriate, displayed information transfers between the main instrument cluster and the touch screen. Further adding to LRX’s involving personality, the different drivetrain modes are matched by changes in the cabin’s background lighting color – green in economy, red in sports and blue in standard mode.

Clever use of space

Although LRX is compact, clever use of space makes it impressively roomy, and many neat design touches maximize its practicality. A second touch-screen area gives a fully interactive display and control for LRX’s iPhone docking facility. On either side of the horizontally-split, power-operated tailgate, removable and power-adjustable speakers include an iPod docking station. There is also a coolbox, plus a bottle chiller that can be clipped to the lowered tailgate. This also has integral aluminum cupholders between two padded seating areas, for a new twist on the idea of a traditional Land Rover tailgate lunch.

Every interior design detail combines to maximize both actual space and the feeling of space. The clear roof is supported by a ‘spider’ frame running into the A-pillars, and the rear quarter pillars have glazed apertures for improved visibility and a lighter feel in the cabin.

LRX’s distinctive seats ‘float’ on individual plinths and have open frameworks to reinforce the impression of light, airy interior space – while also creating useful under-seat and under-floor stowage areas. The clever, powered mechanism of the seat backs maximizes interior flexibility and helps create a large, flat storage area when needed, complete with multiple tie-down options. The generous load space and through-loading option also help accommodate bikes, skis or surfboards.

“Flexible load-carrying capacity is fundamental to the concept of LRX,” says Gerry McGovern. “With this car, we’ve interpreted the idea of Land Rover ‘breadth of capability’ to be more about versatility and on-road dynamics than about ultimate off-roading. This meets the needs of the new customers that we believe would be attracted by this type of car; they will not only appreciate LRX’s flexibility, but will also recognize that it has been packaged with the highest levels of precision.”

Sustainable product design

The structures of the seats and instrument panel are elegant enough to be left exposed – one novel approach that Land Rover’s designers have taken to reduce vehicle weight. Another example is replacing the glass for the side windows and roof with polycarbonate, which is around 40% lighter.

Even the choice of premium-quality trim materials reflects Land Rover’s deep thinking about sustainability, with vegetable-tanned leather (chromium-free, so better for recycling), extensive use of aluminum (both lightweight and readily recyclable) and carpeting made of felt from sustainable sources. And the luxurious, vanilla-colored ‘fine suede’ on the door inserts and headliner is a 100% recycled material made from used plastic bottles.

“We are determined to make sustainability a key element in our future product design and the way we do business, while still creating vehicles that have a strong emotional appeal as well as fulfilling people’s practical needs,” says Phil Popham. “No single technology delivers all the answers to whole-life sustainability, but the LRX concept brings together some of the ideas for the future that interest us, integrating them into a car that we believe represents an exciting way forward for Land Rover.”

2009-02-19T00:38:01-05:00December 13, 2007|
Go to Top